Skip to content
RiceLake Garage Door Repair Co.Open 24/7 (289) 677-1944
Illustrative garage doors scene — Cramahe

RiceLake Garage Door Repair Co.

Springs Openers Doors

Garage Doors in CramaheDoors for the shop,
the bay and the warehouse.

Commercial sectional and rolling steel doors around Cramahe take thousands of cycles a year and the occasional knock from a forklift. We service them with heavy-duty springs, industrial operators and hardware chosen for the work they actually do, and we plan the visit around your opening hours. We also come out to Castleton, Dundonald, Edville, Greenleys Corners, Griffis Corners, Shiloh and Tubbs Corners.

Request a visit

Same fees day or night · Cramahe

Cramaheinformation

NorthumberlandOntario

Town
Cramahe, Northumberland
In business
17 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 48 in 100 homes · mixed ages
  • About 48% of homes in Cramahe were built in 1980 or earlier, according to the 2021 Census.A mixed-age neighbourhood is where retrofits are most common: safety cables added to extension springs, a torsion conversion on an older door, insulated panels replacing a hollow door, or a quieter belt opener under a newly finished room above the garage. Each is a routine job for us.
  • Single-detached houses make up about 91% of homes in Cramahe (2021 Census).Detached houses commonly have attached two-car garages with a wide double door, which is a heavy door on a pair of torsion springs. Spring and cable work on these doors is done as a matched set so the door lifts level and the opener carries only its intended load.

Source: Statistics Canada, Census Profile

Open Cramahe in Google Maps

Cramahe

Garage door services · Cramahe

Everything we do for garage doors in Cramahe starts with a proper look at the whole door. From there the service might be a small adjustment, a set of new rollers, a spring replacement, an opener repair or a new door. The pages here explain each option so you can follow the reasoning.

Cramahe

Everything we do for garage doors in Cramahe starts with a proper look at the whole door. From there the service might be a small adjustment, a set of new rollers, a spring replacement, an opener repair or a new door. The pages here explain each option so you can follow the reasoning.

Job sheet1 of 4

Garage Door Safety Inspection

Illustrative garage doors scene — Cramahe
The call
Your toddler has discovered the wall button. You want to know, from someone who checks these things for a living, that the door will stop and reverse if a small person is under it.
First step
The opener head, its arm and its safety devices

ServiceGarage Door Safety Inspection

Job sheet2 of 4

Garage Door Bottom Seal Replacement

Black bottom seal along a closed white garage door at a concrete threshold. — Garage Door Bottom Seal Replacement, Cramahe
The call
Every mild afternoon the snow melts off the car, runs to the door, and by morning the rubber strip along the bottom is frozen to the concrete. Last week the opener lifted the door and left half the seal on the floor.
First step
Which retainer and which profile

ServiceGarage Door Bottom Seal Replacement

Job sheet3 of 4

Garage Door Manual Lock Repair

Illustrative garage doors scene — Garage Door Manual Lock Repair, Cramahe
The call
On the old wooden door out back, one lock bar hangs loose from a rusted guide and the other is bent at an angle, so the handle turns but the door can still be lifted a hand's width from outside.
First step
Signs the opener and the lock have met

ServiceGarage Door Manual Lock Repair

Job sheet4 of 4

Garage Door Roller Replacement

Gloved hand holding a white garage-door roller beside its track, with two loose rollers and a red tool on a tray. — Garage Door Roller Replacement, Cramahe
The call
A roller near the top corner is riding on the lip of the track rather than inside it, and the section above leans back a little more each week. The door still moves, but it looks one bump away from coming out altogether.
First step
Track straightness and roller clearance

ServiceGarage Door Roller Replacement

Fig.1
Garage Doors

Anatomy of a garage door

Drawn forCramahe
ScaleNot to scale

Balanced doors are lighter on everything: the opener, the hinges, the rollers and the arms of anyone who has to lift them in a power cut. The spring and cable work here is how that balance is set and kept.

  1. Part 1The panels

    Garage Door Panel Replacement

    Years of slap shots have peppered the lower two sections with dents. Each one alone is small, but from the street the door looks tired, and the deepest dent near the centre has cracked the paint and shows bare steel.

  2. Part 2The springs

    Torsion Spring Replacement

    Nothing broke outright, but the door has grown heavier each winter, opens more slowly and squeals as it moves. The springs on an older door have lost tension and the coils show pitting, so the system is asking for attention before it fails.

  3. Part 3The cables

    Garage Door Cable Replacement

    The door went up as usual this morning, then stopped a third of the way with one corner higher than the other. It is wedged at an angle in the opening, the opener is humming, and nothing you press will move it.

  4. Part 4Tracks and rollers

    Garage Door Roller Replacement

    Every morning the door announces itself: a rattle on the way up, a grinding squeal on the way down, loud enough that the neighbours know when you leave. A spray of lubricant settled it for a day or two, then the racket came back.

  5. Part 5The opener

    Garage Door Opener Diagnosis and Repair

    The door goes up perfectly. Coming down is the trouble: partway to the floor it stops, climbs back to the top, and the light on the opener blinks at you.

Garage Door Safety Inspection. Your toddler has discovered the wall button.

Request a visit

Homeowners ask

My car bumped the door. Do I need an inspection if it still works?

A door that still runs after a bump can still be carrying the effects of it. The force travels from the dent into the roller, the track, the bottom bracket and the cable on that side, and any of them can be nudged enough to change how the door hangs. An inspection follows that path and tells you whether the mark is cosmetic, whether a part needs work, or whether the balance has shifted.

How do I look after the new seal?

Wipe it clean of salt and grit a few times a year, and give it a light coat of silicone spray each autumn so meltwater has nothing to bond to. Keep petroleum products and solvents away from it, since they soften vinyl. Clear ice and packed snow from the threshold before running the door in winter. Once a season, look under the closed door for daylight. That is the whole routine.

Why does the inside knob spin without doing anything?

The knob is meant to grip the square spindle with a set screw, and that screw has loosened or the spindle's flat has worn so the knob no longer bites. Sometimes the spindle itself has sheared inside the door. The technician tightens a fresh set screw onto a proper flat or fits a new spindle of the correct length, and the knob and outside handle move as one again.

How often should the whole door be inspected?

Industry guidance suggests a monthly visual and listening check by the homeowner, with the door closed and then in motion, and a yearly visit from a trained door systems technician who goes over springs, cables, rollers, hinges, track, balance and the opener's safety functions. Rollers themselves are worth a look twice a year, and they belong on the list whenever springs or cables are being replaced. A door used many times a day earns more frequent attention.

On-site assessment

Request a visit.

Book a repair, tune-up or new door in Cramahe.

(289) 677-1944, open 24/7.